Do you know how to properly care for your Orlando car tires? While a lot of it can be done here at our Toyota Service Center, it’s always nice to have the knowledge on your side that you can do day-to-day maintenance from the comfort of your own garage or your neighborhood gas station. We can help you with the big things – swapping out tires, patching holes, Orlando tire rotations, and tire balances – but you should be able to check the tire pressure and add air if necessary on your own. We’ve got tops on how to perfectly perform this Orlando car tire service to get your ride back on the road!
Why is car tire pressure so important?
But first, let’s talk about why car tire pressure is important to maintain. There are two main reasons:
- If your tire pressure is too high, you actually lose traction and your ride will be bouncy and uncomfortable. You’re also more likely to experience a tire blowout!
- If your tire pressure is too low, your handling becomes sloppy and loose, especially when maneuvering. You’ll run the risk of your tires wearing more quickly, as well as overheating. You’ll lose fuel efficiency as well when the car tire pressure is too low!
Did you know if your car tire pressure is too low, you’ll actually LOSE fuel efficiency and your fuel costs will go up! Who wants to shell out more money for already-expensive gas?
Perform this Orlando Toyota service on your own!
Luckily, the Orlando car tire maintenance needed to maintain pressure is easy. Check out our step-by-step guide below!
- Before you get started, look up the tire pressure needed in your owner’s manual. You’ll also typically find it on a sticker inside the doorjamb of the driver’s side! The number on the tire is the MAXIMUM amount of pressure – don’t go by that one.
- Next, break out your pressure gauge! You’ll use this to check the existing pressure to see if you need to add more air, or remove some. Additionally, it’s best to do this Orlando car tire maintenance when your tires are cold and on a flat surface!
- Remove the dust cap from the tire’s valve stem and press the tip of the pressure gauge onto the end of the stem. You should get a reading almost instantly, and it’ll let you know the pressure of your tire at that moment.
- Compare the reading to the recommended pressure.
- If you need to let air out of the tire, press the gauge against the valve tip to let air out. Only do it for a few seconds and then check the pressure again until you get the number you want!
- If you need to add air to the tire, press the air hose against the valve, add a bit of air, and check the pressure until you get the number you want!
Voila! You’re done! Why not check your spare tire while you’re at it, too?
Have questions or need Orlando car service? Come on down and see us at 3575 Vineland Road!